www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Alright today we are going to review motorcycle carrier part number B350DBC, the Boss Motorcycle Carrier. Alright we will cover a few of the specs of this motorcycle carrier. First off, it does have different capacities depending on the hitch that you have. It does come with a handy chart on there if you tend to switch it around on different vehicles. It features all steel construction with a powder coat finish on it. It has a built-in ramp assembly so it does not have any separate parts. It does come with lighting too in case the motorcycle does block the lights on your vehicle itself, which is really nice. It also comes with two tie-down points to hold the motorcycle in place. And finally, on the front wheel, instead of having pins to adjust, it actually has a cradle that the wheel actually falls into, which is really nice. Or you can still adjust it for different tire diameters. 1:01 We will just go ahead and slide it in until we match up to the hitch pin holes. You may have to adjust the anti-rattle device to line up the hole and then install the hitch pin. Alright, now we will go ahead and tighten down the anti-rattle device. We will start off by tightening it down by hand. Then, we will use a tool on the opposite end to torque it down finally. Alright, once we have the anti-rattle device hand tightened, we will go ahead and use ...
Tags: etrailer.com, B350DBC, Boss Motorcycle Carrier, Boss, motorcycle carrier, hitch cargo carrier, hitch mounted, fixed carrier, with lights, review
Thanks To : Camera Lens microscopes optics Picture frame Backup Mobile
ไม่มีความคิดเห็น:
แสดงความคิดเห็น